Junofloor products are defined by clear numerical specifications that support practical decisions for flooring projects. These figures cover dimensions, performance, and value, helping users assess suitability without guesswork.

Standard Dimensions and Coverage

Each Junofloor plank measures 1200 mm in length and 200 mm in width. The standard thickness is 8 mm, which balances durability with manageable weight during handling. A typical pack contains eight planks and covers 1.92 square meters. For larger areas, planners calculate needs by dividing total floor space by 1.92 and adding 10 percent for cuts and waste. These numbers remain consistent across most residential lines, simplifying inventory for rooms between 10 and 60 square meters.

Weight per plank averages 2.1 kg, so a full pack weighs roughly 17 kg. This allows two people to move materials easily on site. Edge profiles include a 0.5 mm bevel that reduces visible seams once installed.

Performance and Durability Ratings

Junofloor carries an AC5 abrasion rating, indicating suitability for heavy residential or light commercial use. Impact resistance reaches 8 N when tested under EN 13329 standards. Moisture absorption stays below 8 percent after 24-hour submersion, supporting use in kitchens and bathrooms when paired with proper underlayment.

Thermal resistance measures 0.08 m²K/W, making the material compatible with underfloor heating systems up to 27 °C. Sound reduction averages 18 dB with recommended foam underlay. Warranty coverage extends 15 years for residential installations and 5 years for commercial settings when installation guidelines are followed.

Cost and Value Metrics

Retail pricing ranges from 18 to 28 euros per square meter depending on finish. This places Junofloor in the mid-tier segment where longevity offsets initial outlay. Maintenance costs remain low, with annual cleaning expenses estimated at 0.50 euros per square meter using standard neutral cleaners. Replacement of a single damaged plank costs approximately 25 euros including labor, preserving the overall investment over the product lifespan.

These figures allow direct comparison with alternative flooring options using the same units of measurement. Users who track these numbers during planning typically achieve accurate budgets and fewer installation surprises.